SOLD Broughton Always On High Pass Filter

Discussion in 'For Sale: Effects and Pedals' started by Collin Lyle, Jul 29, 2019.

  1. Collin Lyle

    Collin Lyle Why not? Supporting Member

    Feb 22, 2018
    Mint Condition.
    Price includes shipping CONUS

    A standard Broughton high pass filter with the bypass switch removed. This design allows a more compact layout, fitting on a single pedal board rail, or even mountable underneath a pedal board.


    The high pass filter is a 12 dB per octave low frequency filter. The knob controls the cutoff frequency and ranges from 25 Hz to 190 Hz. It has the same frequency points as the switched version, but it does not have the frequencies printed around the knob.

    The stock input impedance is 1MΩ (if you want a different value, write it in the notes when purchasing). The output impedance is 100Ω. This device will work with active or passive instruments, as well as with other devices such as pedals, preamps, or effects loops.

    The High Pass Filter requires a DC power supply (not included). The DC supply should be a standard Boss style connector, center negative polarity. It can accept 9 to 24 volts. Higher voltages will provide more clean headroom. The current draw is approximately 10 mA.

    Dimensions: 3.64" wide x 1.75" long x 1.06" tall

    Attached Files:

    catcauphonic likes this.
  2. Lovep

    Lovep Supporting Member

    Mar 17, 2011
    Indianapolis, IN
  3. catcauphonic

    catcauphonic High Freak of the Low Frequencies Supporting Member

    Mar 30, 2012
    Seattle WA
  4. jebmd

    jebmd Supporting Member

    May 4, 2009
    Iona, Florida
  5. scubaduba

    scubaduba Moderator Staff Member Supporting Member

    Dec 23, 2003
    Darn, how did I miss this? Been looking for one of these.
  6. Lovep

    Lovep Supporting Member

    Mar 17, 2011
    Indianapolis, IN
    Saw it 5 mins after the initial post...

    scubaduba likes this.