BS/DS Coil Tap on Push Pull help

Hello,

I’m trying to wire up a Novak BS/DS pickup with wiretap on an Alpha Push/Pull pot. The pickup has three leads (Red, white and green). Currently, I am putting the red lead in the top left slot of the push pull pot, and the white in the bottom left slot. I will ground the green. How do I wire the tabs on the push/pull pot in relation to the volume pot and the tone cap?

thanks!
Matt

 

Thank you @LoveThatBass ! Think I’m tracking, but to clarify, the center wiper wire lug is one of the 6 small lugs on the switch, and it gets connected to the left round lug?

 

Thanks Matt, I'll give that a shot! Wondering if it will be much different because the switch is attached to the tone control, but we'll see!

 

So, I switched the push pull to the volume (not sure why I was hung up on it being on the tone in the first place), and the schematic above worked! Sounding great now, thanks all for your help.

 

Finished product

 

Ya I was not thinking about that the right way and was wiring it to the tone. Should have just patched a wire over to the volume, but what I ended up with is cleaner anyways.