/ Register

Can I run GK 1001RB-II with Neo410 'full range' with 4 core speakon?

Discussion in 'Amps and Cabs [BG]' started by Duncan Saunders, Jul 9, 2021.

Tags:
  1. Jul 9, 2021 #1
    Duncan Saunders

    Duncan Saunders

    Jul 9, 2021
    Hi all. Thanks in advance for your advice.

    I have a GK 1001-RB-II amp and GK Neo410 cab.

    I've read numerous posts about people wanting to run non-GK cabs with GK biamp capable heads. My question is different:

    My cab came with a 4 core speakon cable, for biamping. I don't have a 2 core speakon cable.

    Is it safe to switch the cab to 'full range' mode while using the 4 core speakon cable which came with the cab?

    Many thanks

    Duncan
     
  2. Jul 9, 2021 #2
    DWBass

    DWBass The Funkfather

    Jan 24, 2003
    Newport News, VA via NYC
    I believe so.
     
  3. Jul 9, 2021 #3
    abarson

    abarson

    Nov 6, 2003
    Santa Cruz
    It shouldn't be a problem, as long as you set the speaker mode to full range. Only the woofer/main knob on the amp will have any effect: the tweeter knob won't do anything.
    700rb_1001rb.pdf (squarespace.com) page 7.
     
    agedhorse and jeff7bass like this.
  4. Jul 9, 2021 #4
    Wasnex

    Wasnex

    Dec 25, 2011
    Depends on which version of the NEO cab. My understanding is series 4 Neo cabs won't work because an NL4 plug won't fit.

    Official word from GK is recent designs are using NL2 panel mount connectors, which do not accept NL4 plugs. This goes for amps and cabs. However early versions of some amps apparently still had NL4 plugs and some photos for series 4 Neo cabs show biamp capabilities and NL4 panel mount connectors, which do not exist in the production cabs. The official explanation is a prototype was used for the photos.

    This was thoroughly discussed in this thread: Speakon issues... | TalkBass.com The most useful info starts on p. 2.
     
    TomB, abarson and agedhorse like this.