1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Carvin and SWR

Discussion in 'Amps and Cabs [BG]' started by markG, May 13, 2001.

  1. markG


    May 26, 2000
    This might be a stupid question, but I don't really know about ohms and all of that so I'm gonna ask it anyway. Is it possible to use the SWR Son of Bertha 1x15 with the RC210, or will the ohms not match up. I haven't heard many good things about carvin's 1x15, so I'm trying to find one that will sound better, but I want to make sure the ohms and such will match with my RC210. If there are any other good cabs that will work with my carvin please let me know that too. Thanks!
  2. rllefebv


    Oct 17, 2000
    Newberg, Oregon
    The RC210 can be run bi-amped, using seperate power amps for low or high end. Regardless of the ohm rating. I use a 1X15 8 ohm cabinet for my low-end, getting 175W, and the 2X10 4 ohm for the high-end getting 250W... works fine! You should be okay, read up on the owner's manual for both the amp and the cab...


Share This Page