1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD Carvin BX700 Amp and Tech 21 Sansamp RPM

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by maverick49, Feb 7, 2017.


  1. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    Price:
    210-310
    Location:
    California
    Up for sale are a Carvin BX700 Amp and Tech 21 Sansamp RPM preamp in very good condition. Specs on the BX700 below. BX700 comes with rack ears. This is a great combo with lots of flexibility. I have been able to dial in a nice Geddy tone with this pair and a 2x10.

    Carvin BX700 w/power cord, no box - $320 $310 shipped CONUS
    Tech 21 Sansamp RPM w/power cord, no box - $220 $210 shipped CONUS TRADED

    Both are pictured together in a nice SKB 4 RU short case with Furman power. If you are interested in the whole rig, PM and we can make a deal!
    BX700 SPECS:
    - OUTPUT POWER: 8 Ohms: 300w, 4 Ohms: 550w, 2 Ohms: 700w (with 2 ohm switch)
    - OUTPUT MODE: high efficiency CLASS D technology
    - POWER SUPPLY: high frequency switching - FREQUENCY RESPONSE: +/- 1 dB 20 Hz - 20 kHz amplifier sections
    - DAMPING FACTOR: >300
    - PREAMP: 3 stage CLASS A
    - PREAMP TUBE: 12AX7 switchable in/out
    - INPUT IMPEDANCE: >200Kohms
    - ACTIVE/PASSIVE Input Jack: 10 dB gain switch - accommodates all basses
    - CONTOUR control: Flat to -15 dB at 500 Hz
    - BASS/TREBLE CONTROLS: +/-12 dB at 50 Hz & +/-12 dB at 10kHz
    - LOW MID Parametric: +/- 12 dB sweepable 50 to 500 Hz
    - HI MID Parametric: +/- 12 dB sweepable 200 to 2kHz
    - GRAPHIC EQ: 9 band +/- 10 dB @ 50,80,125,250,500,800,1.3k,2.6k,5k
    - COMPRESSOR/LIMITER: up to 3:1 compression ratio, convenient one knob control
    - DI OUT with Pre/Post switch: -50 to +4 dBu adjustable, DC isolated XLR bal output
    - EFFECTS LOOP: -10dBV, buffered
    - FS22 FOOTSWITCH: Controls Graphic EQ on/off & MUTE on/off
    - SOFT START: gradually turns on the amp to prevent surges that can trip circuit breakers
    - PROTECTION: speakers, over current, under voltage and thermal
    - AC VOLTAGE: 90-250V, 50-60 Hz - Power Requirements: 150VA
    - Dimensions: 3.25" high (with feet) X 14.0" wide X 9" deep
    - Net Weight: 5.9 lbs. net (2.65 kgs)

    IMG_4130.JPG
     
    Last edited: Feb 16, 2017
  2. how much for the whole kit n caboodle my friend
     
  3. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    PMed you. thanks!
     
  4. rtz

    rtz

    Jan 1, 2008
    Interested in the sansamp if you don't sell it all
     
  5. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    Will do - thanks!
     
  6. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    price drop
     
  7. Rocinante_x1

    Rocinante_x1 Plus ça change, plus c'est la même chose

    Aug 22, 2004
    Washington State
    Interested in any trades at all? Im interested in the RPM.
     
  8. what do you have to have for the furman?
     
  9. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    Shoot me PMs. We can work something out!
     
  10. maverick49

    maverick49 Gold Supporting Member

    Jun 13, 2012
    Southern California
    Bx700 sold
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.