The amp is in excellent condition as it was racked its whole life. Shipping discussed per location. No trades {} {} {}
LOWERED PRICE! power specifications CD2000 560w @ 8Ω stereo,1000w @ 4Ω / 2Ω1 stereo, 2000w @ 8Ω / 4Ω1 bridged 1kHz, 0.2% THD+N / 12Ω stereo and 4Ω bridged operation at 1kHz, 0.4% THD+N Features • Dramatically reduced net weight • Linear power supply / digital output stages • Very low current draw • Latest generation of high-speed, mosfet output devices • Cooled by variable speed fan with back-to-front airflow • Inputs - Balanced female Neutrik XLR, 1/4" TRS combo jacks • Outputs - Neutrik Speakon and 5-way "touch-proof" binding posts • Mode selector switch for stereo, parallel and bridged-mono operation • Ground-lift switch and rear panel circuit breaker • Recessed, stepped attenuators with removable knobs • 16-gauge steel chassis, cast aluminum front-panel TourClass® protection circuits ACL (Active Clip Limiting) prevents speaker damage by providing gentle gain reduction when signal approaches the clipping threshold. IGM (Instantaneous Gain Modulation) monitors speaker loads to detect conditions that may overstress output devices. This allows safe operation into nominal 2 ohm speaker loads. AUTORAMP gradually increases gain to the attenuator level-set- tings when the amplifier is turned on. This prevents abrupt turn-on level. Other protection features include: short circuit, dc voltage, com- prehensive thermal management, current in-rush turn-on/off tran- sient, and sub/ultrasonic input.
Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products. Browser not compatible