1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD Crown XLS 1500 Two-channel, 525W @ 4ohms Power Amplifier

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by LimaGuy, Feb 27, 2016.

  1. LimaGuy

    LimaGuy The Godfather Supporting Member

    Apr 21, 2011
    New York
    Crown XLS 1500 Two-channel, 525W @ 4ohms Power Amplifier

    This unit has been hardly used in a inhouse Studio as power for a bass rig.
    It is in like new condition with original Manual box and packing material.
    A few tiny surface scratches that you have to go within a foot to see.

    I am going in a different direction so I do not need this any longer.

    $225 Shipped Con USA Paypal

    2 Channels
    8ohms Dual 300W
    8ohms Bridged 1050W
    4ohms Dual 525W
    4ohms Bridged 1550W
    2ohms Dual 775W

    Sensitivity 1.4Vrms
    Frequency Response (at 1W, 20Hz to 20kHz) +0dB, -1dB
    Signal to Noise Ratio >103dB
    Total Harmonic Distortion <0.5%

    Width 19 in. (48.3 cm)
    Height 3.5 in. (8.9 cm)
    Depth 7.7 in. (19.6 cm)
    Net Weight 8.6 lbs (3.9 kg)

    XLR, 1/4", RCA inputs provide outstanding flexibility

    1/4” inputs can be used as loop-thrus to distribute signal to additional amplifiers

    Electronically balanced XLR inputs; touchproof binding post and Speakon outputs

    Precision detented level controls, power switch, power LED, and six LEDs which indicate signal,clip and fault for each channel

    Efficient forced-air fans prevent excessive thermal buildup

    Crown's XLS DriveCore Series amplifiers define the standard for portable PA systems with unmatched
    performance, technology and affordability. Its advantageous flexibility includes multiple inputs so
    you can plug in anything and play anywhere, along with several system setup configurations. Simply put, the
    XLS is the most reliable, versatile, efficient amplifier available today.

    High performance, lightweight class D amp
    Integrated PureBandTM Crossover System for better performance and control
    PeakxTM Limiters provide maximum output while protecting your speakers

    The PureBand™ Crossover System in the XLS Series adds an enormous amount of flexibility and performance to any system. With this system, the crossover frequency is completely variable allowing the choice of any crossover point between 50Hz and 3kHz on 1/12 octave centers. The use of 4th order Linkwitz-Riley filters provides steep slopes for a seamless transition between high and low drivers. And with four crossover modes to choose from providing the ultimate in flexibility, all of your system needs are covered:
    1.Crossover Mode (CH1=LPF, CH2=HPF) – When chosen, this mode enables a LowPass Filter on Channel 1 and a HighPass Filter on Channel 2 at the frequency chosen.
    2.LowPass Mode (CH1=LPF, CH2=LPF) – When chosen, this mode enables a LowPass Filter on both Channel 1 and Channel 1 at the frequency chosen.
    3.HighPass Mode (CH1=HPF, CH2=HPF) – When chosen, this mode enables a HighPass Filter on both Channel 1 and Channel 2 at the frequency chosen.
    4.Bridge Mode (LPF or HPF) – When the amplifier is put into Bridge-Mono, you are still able to use the crossover system and employ either a LowPass Filter or HighPass Filter at the frequency chosen.

    All of the PureBand™ Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface.
  2. Zooberwerx

    Zooberwerx Gold Supporting Member

    Dec 21, 2002
    Virginia Beach, VA
    This is a best buy, folks. Match with preamp of choice and you're good to go.

  3. LimaGuy

    LimaGuy The Godfather Supporting Member

    Apr 21, 2011
    Last edited: Feb 27, 2016

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.