For Sale Custom Made DIY10 (2)

I made these from the specs on the below thread and then updated the cabinet.

Low-cost DIY practice/coffeehouse tweeterless 110 [long]

Used cabinet grade plywood (not the mdf stuff). Put an edge on to add a grille, then upgrade the cabinet from the Eminence 2010 to the Eminence 2510 speaker.

Please Read - Duratek finish - no rat hair carpet. Strap handle and added plastic stackable corners on one cabinet. The second cabinet has handle, but needs corners and Duratek finish. Also second cabinet has 2 1/4" inputs to chain the cabinet together for 4 ohms.

With special stainless steel grille. Jack plate with one 1/4" jack and room to put another on finished cabinet.

$125.00 for finished cabinet, $100.00 for second cabinet - Buyer pays shipping. No trades please.

 

The Cabinet is 16.5" tall, 15.5" deep and 12" wide. As for weight, I do not have a scale that works right now, but I would say 12-15 pounds at the most.

It actually pictured on page 45 of the above link - but the purpose of the link is to see about the design of the cabinet as "DUKE" prepared.

 

relist

 

yeap - actually back on the market for sale

 

Acworth just up 75 from Marietta. Marietta then Kennesaw then Acworth.

Lenny

 

Discount for local pickup

 

Will

Yes this is Lenny I bought your 1203 cabinet from you.

I have a box in the shed and tomorrow - I will get you a quote for both cabs shipped to you. Almost midnight here, so I hope you do not mind if Iget it to you tomorrow.

Lenny

 

Not me on that Will, but I did get the cabinet from you.

Will get you a quote tomorrow.