1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD Demeter VTBP-M-800D

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by sonicyogi, Dec 11, 2017.

  1. sonicyogi

    sonicyogi Supporting Member

    Sep 11, 2005
    New York
    Amazing 800 watt amp - With Jensen upgrade!

    From Demeter:

    Tone section:
    • Treble Control: The treble control gives 6 dB of boost or cut at 4 kHz (6dB per octave, shelving type).
    • Middle Control: The middle give 6dB of boost or cut at 500Hz (wide Q, peaking type).Bass Control: The bass control gives 9dB of boost or cut at a selectable frequency of 60Hz or 120Hz (6dB per octave, shelving type).
    • Presence Control: The presence control gives up to 12dB of boost at a selectable frequency of 2kHz or 4kHz (active type, 6dB per octave).
    • Mode switch: Dark, is a high frequency cut fatting up your fundmental. Normal, flat opertion showing off more overtones. Bright, brings out the overtones on the dullest basses or speakers.
    • Internal Volume Trimmer: This control is designed to match the output volume of the VTBP-M-800D with the sensitivity of any Bass.
    • Optional, Studio Output: The VTBP-M-800Dm- features a mic level Jensen DB-E output transformer for a balanced studio output.
    • Effects Loop: in/out line level
    • Power Amp Outputs: Operating at 4 (800w),8 (500w) or 16 ohm (250w). 1/4” & Speakon
    Preamp Specifications
    • Inputs: one instrument level 1/4” jack.
    • Output impedance (line): > 1 kohm, (unbalanced)
    • Minimum load impedance: 10K
    • Input impedance: > 1megohm
    • Maximum output: + 24dBV
    • EQ gain : + or - 12 dB
    • Signal to noise ratio: - 80dB
    • THD : .5%
    • Outputs (preamp): 1/4” unbalanced , Optional 3 pin XLR Direct out
    • Frequency response : 10Hz to 40kHz
    • Tube: 1-12AX7a selected 1-12AT7
    • Operating voltage: 115V or 230V AC
    • Power supply: 280V DC
    • Filament: 6.3 V DC
    Power Amp Specifications
    • Outputs (power amp): 1/4” Speaker & Speakon
    • Output impedance (power amp): 4 ohm, 8 ohm, 16 ohm
    • Output Power (power amp): 800 watt RMS @ 4 ohms, 400 watt RMS @ 8 ohms

    Attached Files:

    Last edited: Jan 18, 2018
  2. kittywithabanjo

    kittywithabanjo Supporting Member

    Nov 26, 2014
    Coquitlam. BC
    Is there a Cover. For this?
  3. sonicyogi

    sonicyogi Supporting Member

    Sep 11, 2005
    Just the head, but I’m sure one could be had from Mono or Studio Slips.
  4. AngusHasMoxie


    Mar 11, 2013
    Easthampton, MA
    Formerly endorsed by Carvin, Basson and Dimarzio
    This is an amazing head, I've been running it for about a year, it does everything simply and wonderful. Using it as both a Bass head and synth because it's so warm and gooey!
    sonicyogi likes this.
  5. steverosati


    Apr 7, 2004
    city of Dis
    Would you be interested in a trade for a Azola Bug bass?
  6. kimmyt

    kimmyt Supporting Member

    Sep 8, 2009
    Gilroy, CA
    Is this $1150 shipped?
  7. sonicyogi

    sonicyogi Supporting Member

    Sep 11, 2005
  8. steverosati


    Apr 7, 2004
    city of Dis
    Do you take PayPal?
    Last edited: Jan 30, 2018

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.