Diagram for pj bass build: 1 vol, 2 tone, 3 way mini toggle, series parallel via 2 way mini toggle

Discussion in 'Pickups & Electronics [BG]' started by IrishFred, Jul 7, 2021.

  1. IrishFred


    Jun 28, 2015
    Hopefully the title kind of explains what I'm trying to do.
    This is my first bass guitar build, which I'm nearly finished. It's gonna be a PJ pickup configuration with a 3 way mini toggle pickup selector switch.
    It's also gonna have a two way mini toggle on-on switch to switch the P pickup between series and parallel.
    It's gonna have 1 master volume and two tone controls (one for each pickup).
    I'd appreciate if any one can come up with a wiring diagram for my setup. I've built 3 electrics already, but I've never wired a mini 3 way selector switch and I've never done series / parallel switching with a mini toggle on-on switch either. Also, I think I'll need to cut one of the wires in the P pickup as part of the series parallel setup, so not sure of the best way to approach this. Do I solder on new wire/s extension/s to the wire/s I cut? Anyway, any advice / help appreciated in this area too.
    A diagram would be tremendously helpful.