Diferent Setup

Discussion in 'Amps and Cabs [BG]' started by Oberg, Dec 12, 2005.

  1. Oberg


    Apr 10, 2005
    Hi Guys. im planing to buy a new rigg, and i want something keep whit tubes in the preamp, so i thought of this setup and idé. havent seend many players whit this kind of setup.

    does anyone know anything?

    setup: tube preamp > Eq > Poweramp > Cab

    i have thought about the following components:





    what do u guys think?
  2. Well - i have a preamp and poweramp setup - just no EQ in between, but i leave that to my preamp and eq pedal.

    As far as the poweramp and the cab - the cab is 8ohms - can the poweramp be mono-bridged @ 8 ohms? If it can't, you'll be only running that cab through 8 ohms on one side - and that means you'll only have 240w of available power. :eek: :( :scowl: :rollno: :bawl:
    I'd make real sure you'll be able to drive that quaddy there mate!

    Also - is that pre-amp specifically made to be able to drive bass?
    Make sure the EQ settings go low enough (into the 30-40Hz range, or close)
    If at all possible - check them out - see if they sound OK.

    Good Luck
  3. Oberg


    Apr 10, 2005
    thank u mate... i will be checking that up.

    the preamp is made for vocal/instruments.