Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

DIY 1x15 Cab Help

Discussion in 'Amps and Cabs [BG]' started by DaS HaaS, Feb 12, 2004.


  1. DaS HaaS

    DaS HaaS

    Feb 11, 2004
    Sunrise, Florida
    Endorsing Artist - Ampeg, Ernie Ball
    I built a 1x15 bass cab that has allot of bass with 2 port holes. Im having a hard time trying to figure out how to make the connections and how to make a plate on the rear of the cab so I can plug the speaker cable from my amp to. Any suggestions?
     
  2. DaS HaaS

    DaS HaaS

    Feb 11, 2004
    Sunrise, Florida
    Endorsing Artist - Ampeg, Ernie Ball
    Thanks i'll buy that one, but now what about the internal stuff like cables and doodads...etc
     
  3. jock

    jock

    Jun 7, 2000
    Stockholm, Sweden
  4. DaS HaaS

    DaS HaaS

    Feb 11, 2004
    Sunrise, Florida
    Endorsing Artist - Ampeg, Ernie Ball
    Thanks for the help manig...
     
  5. BillyB_from_LZ

    BillyB_from_LZ Supporting Member

    Sep 7, 2000
    Chicago
    You could probably buy a prewired jack cup with the wiring harness and the whole shot from Dave at Avatar. Shoot him an email at dave@avatarspeakers.com or find the phone number at www.avatarspeakers.com

    I suspect that the price would be reasonable and all you'd have to do is cut a rectangle out of the back of your cabinet and screw the jack cup in.