Separate names with a comma.
Discussion in 'Amps and Cabs [BG]' started by Paingod1, Dec 28, 2003.
What would your dream bass rig be if the coin werent a problem?
any Aguilar fans here?
At the moment...
Peavey 1x15, Peavey 4x10, Peavey MAX700... thats pure sex.
Phil Jones M-1000 head
Phil Jones 8T & 16H cabs
i am not sure about what would fill my racks but for cabinets all custom made would be a 2x18 wiht a 4x15 and a 8x10. low end that makes you puke.
Here we go-
GK 2001RB with a Sansamp RBI, Alesis DEQ 224, and Boss NS-50 in the effects loop, into either 2 GK 410RBH or one 410RBH and one 115 RBH, of if GK's creative team ever gets off the bums, a 610RBH
2 Hiwatt DR103s with 4 Hiwatt SE4122 cabs.
But practical dream rig:
Fender Bassman 135 into 2 Avatar B212s for the lows, and Fender Bassman 100 driving the highs into 2 Avatar guitar 212s with Eminence M12s.
62' p bass goin through a early 70's svt pushing two 8x10's, with my signal also going to an ashdown rpm pre for a little more dirt.
My dream rig would be:
And don't forget the EBS FXpedals!!
Ashdown ABM-500 EVO II + ampeg/ashdown 810 + all the effects I want (i would buy and test them all!!) + all the basses I want (I would buy and test them all!!!)
One kickass double bass + one kickass double bass combo
+ all the things I don't need but look cool too
My dream rig:
Preamp: Avalon VT-737SP
Poweramp: Mackie M1400
Cabs: 2 Glockenklang Double Light
That should work for both DB and Electric
Whenever Trace Elliott starts producing again, whatever their top amp would be.
For speakers, EVs all the way.
'62 (or '64) P bass, same era Jazz.
If only it could be done ...
Dream set up...easy !
Marshall VBA and 2 Marshall 4 x 12.
Then multiply that baby by 3.
Tha really would be Power and Glory !
Hmm, My rig is fine right now, but for an upgrade...
2x Sansamp RBI > QSC PLX 3402 > 4 eden 4x10XLT's @ 8 ohms per side, so 8 XLT's would be schweeet. I'd want a Boogie 4x10 somewhere for some cutting action.
Pretty happy with my rig right now.
Rack Rider power conditioner
Aguilar DB680 pre-amp
Stewart World 2.1 power-amp
SWR Goliath III (4x10)
SWR Goliath Sr (6x10)
Bag End S18-D
Pretty much happy with my set up
Ashdown RPM EVOII pre
Matrix 1.4k power amp
Ashdown Mini 4*8
Ashdown Mini 1*15
The only thing that I'm likely to change is the power amp as its pretty heavy.
If I'm playing anywhere where this isn't loud enough then I'd expect a PA !
Tech 21 SansAmp RBI Rackmount
Eden 410XLT x2
Eden 115XLT x2
I would like a lengthy audition of the following and keep what I couldn't live without.
MB M-2000 (two -- I really like the sound & versatility of these)
JB Audio Pro Bass (or two)
early '70s SVT
a modded Mesa Boogie 400+
Glockenklang Bass Art Classic
Millennia Origin STT-1
Phil Jones P-1
(oh yeah) my current Demeter VTBP-201S w/primo tubes (I think its a keeper)
Crown MacroTech 2402 (maybe a couple)
Accugroove Whappo Jr.
Accugroove Tri 210 + Tri 110 + Tri 112
Schroeder 21012, 1210 (two)
Bergantino HT310 (two -- with the newer 10" drivers Jim B is using)
Bergantino HT112 (two) + EX112 (two)
Epifani T112 + T110 (two of each)
EA VL208 (four)
EA VL210 (two w/heavier magnet 10" drivers)
EA CX-310 (two)
4X GK 2001RB
6X GK 410RBS
2x GK 115RBS
Live I'll run two clean heads, and two dirty heads. Cleans are 4x10's and dirty are one of each. Gotta convert all basses to stereo first!
Furman AR1215 voltage regulator
top of the line QSC Powerlite
and 2 Acme B-2's for their portability
I'm also pretty happy with my rig.
Sans Amp RBI preamp
Crown CE 1000
Eden 210 XLT
2 Avatar CB112s
My dream rig would be different mostly for weight and I like 410s,I just don't like lifting them by myself.
Peavey DPC 1400
2 Epiphani 410 ultra lights
This would give me a light standalone cab I could use most of the time and the extra 410 would be for real big rooms or outdoors.I'd only get this if I had money to burn as my rig right now works great.