SOLD EA iAMP Doubler

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by bassman28, May 22, 2018.

  1. bassman28

    bassman28 Bass Pluckers Owner Posting in Talkbass Bazaar Supporting Member Commercial User

    Dec 31, 2010
    North Carolina
    North Carolina
    • Incredible 2 lb versatile amp that fits in your hand with huge power and tone.
    • Inputs: Configuration: 2 independent channels, Channel 1 Mid EQ set at 500Hz for electric bass, Channel 2 Mid EQ set at 800Hz for upright/acoustic bass- Channel 2 has XLR input with phantom power
    • Input Impedance: 1Meg ohm input impedance on both inputs
    • Trim controls: Independent channel level adjustments, DI output level, and high pass filter
    • Intelligent Input Switching: Select different settings for 1 bass or have independent setups for 2 basses, Channel 1 or Channel 2, or Channel 1+2
    • Controls: Channel switch, Input gain, 3-Band EQ, Master Volume, Mute switch, Effects loop blend
    • EQ: Low, Mid, and High for each channel, Variable high pass filter 22-80 Hz, 6db per octave (allows selection of a frequency below which response is reduced, helps boomy rooms and stages (Channel 2 only) – Channel 2 also includes switchable Phantom Power, Variable Phase Control, and switchable Variable Notch Filter
    • Effects Loop: Parallel effects loop with blend control, wide range of setups via internal jumpers
    • Outputs: Speakon speaker, tuner, effects send, balanced DI out (1/4″ stereo wired as TRS)
    • Protection: Internal cooling fan, thermal and overload
    • Line Voltage: 100/120 – 240 volts internally selected via jumper
    • Frequency Response: 20Hz to 20kHz +/- 3dB
    • Power Output: 550 watts @ 4 ohms 310 watts @ 8 ohms
    • Size: 2.1″H x 10.5″W x 5.4″D
    • Weight: 2.6 lbs.
    • $600 and West Coast add $15
    • 20180519_133125.jpg 20180519_133221.jpg 20180519_133158.jpg
  2. Tkeating


    Apr 17, 2018
    EA got it right with these heads!!!