1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

EBS Microbass II

Discussion in 'For Sale: Parts, Strings, and Accessories' started by Biker4Him, Sep 10, 2005.

  1. Excellent preamp. Small, light, and all kinds of features.

    In original box with paperwork

    $420.00 shipped inside the US. Paypal included.

    The MicroBassII can be used in many different ways. For example, as an active direct box, a one or two channel preamp, instrument switcher or blender.

    The two channels provide sound shaping from high end solid-state types to distorted timbres using the rewarded tube emulation circuitry found in the EBS range of professional bass heads.

    An incorporated effects loop gives the user added flexibility for connecting to other effect pedals or for mixing in an external audio source such as CD player for rehearsal purposes.

    The balanced output with speaker simulator option provides unmatched flexibility in live and studio situations. The MicroBassII can also be powered in four different ways, with a DC power supply, battery, EBS Phantom Power System™ or 48V microphone phantom power.

    EBS MicroBassII is used by:
    Victor Bailey, Stanley Clarke, Jonas Hellborg and many more!

    EBS MicroBassII Specs:

    Nominal Input Level: - 8 dBv
    Input Impedance: 10 Mohms (Ch A) 1 Mohms(Ch B)
    Output Impedance: 10 kohms
    Frequency Response: +0 / -3 dB 20 - 20 kHz
    Tone Controls: Bass +/- 15 dB @ 100 Hz, Treble +/- 15 dB @ 10 kHz shelving, Bright + 12 dB @ 10 kHz, 15 dB gain, Midrange +/- 12 dB, Frequency Range 50-2.000 Hz Q 0.80, Edge +/- 12 dB @ 7 kHz
    Boost Control: Gain 0-30 dB
    Drive Control: Gain 0-35 dB
    Gain Type: Class A Tube Emulator
    Low End Compensation: < 250 Hz
    Balanced Output: Impedance 500 ohms balanced.
    Nominal Level: 10 dB
    Frequency Response: +0/-3 dB 20 Hz - 30 kHz
    XLR Connections: 1-GND, 2-Hot, 3-Cold
    Options: GND Lift, Speaker Simulator
    Impedance: 3 - 200 ohms recommended
    Power Requirements: 9 V DC Regulated, 10 mA, 15 mA with Phones
    Powering Modes: DC Power Supply, Battery, 48V Phantom power, EBS Phantom Power System

    Common Specifications:

    Dimensions: Width 6.0" / 15.3 cm, Height 4.3" / 11 cm, Depth 2.3" / 5.8 cm, Weight 875g / 1.95 lbs

    Specifications are subject to change without notice.


    • 9-Volt Phantom Power System™ powers any EBS pedal and/or active bass.
    • Natural tube-like compressor allows effect compression, without side effects.
    • Easy-dialing filter section for quick setups.
    • Equipped with soft filter overdrive function.
    • Wide range middle filter with a traditional timbre.
    • Soft BRIGHT filter for a natural overdrive.
    • Floating balanced XLR output with ground lift, pre/post EQ and mute options.
    • True 24dB/octave active crossover filters.
  2. BullCityBass


    Jun 14, 2005
    Durham, NC
    PM sent
  3. back at ya!!
  4. Sold.