Eden voltage

Discussion in 'Amps and Cabs [BG]' started by blamusic, Feb 1, 2005.

  1. blamusic


    Mar 25, 2004
    Hey all!

    I am about to buy myself a U.S. Eden WT-400 head, but I am located in Europe. I was informed that theres no need to do any surgery in the bass, that only a fuse has to be turned around and it will work on European 220V. Is that true? I bought a Gallien previously and had to have parts changed to have it work on European voltage.

    I am thankfull for all information. I have a few days, I am counting on all u bass experts :)

  2. IvanMike

    IvanMike Player Characters fear me... Staff Member Supporting Member

    Nov 10, 2002
    Middletown CT, USA
    as far as i remember eden amps are internally switchable for both voltage and frequency, but i'd double check with eden.
  3. Sundogue


    Apr 26, 2001
    Wausau, WI
    From the manual...

    Combination Power Cord Jack and
    Fuse Holder – The removable power cord
    is attached here. Pulling the holder out of
    the top of the power inlet accesses the fuse
    carrier. Your unit was shipped with a spare
    fuse inserted in the fuse carrier. USE ONLY
    REPLACMENT. U.S. users should make
    sure the fuse holder is installed so the “115
    VOLTS” reads right side up. For Europe the
    230 should be right side up. Some European
    models come with a holder marked (FUSE)
    they are configured for 230 / 240 only and
    must be adapted by a service tech for U.S.
    standard voltage. The standard fuse for U.S.
    use is (5) Amp slow blow or time delay.
    Do not use fast blow fuses.
  4. Frank Martin

    Frank Martin Bitten by the luthiery bug...

    Oct 8, 2001
    Budapest, Hungary, EU
    Szia! ;)

    ^^ Amit ő mondott ^^

    Sok sikert!
  5. blamusic


    Mar 25, 2004
    Thanks and köszi for all the help :) Judging by the comments I guess I'll have no problem buying U.S. and using it here in Europe. Thanks again