1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

eden WT-500 + 4ohm Cab + 8ohm Cab

Discussion in 'Amps and Cabs [BG]' started by mithrandir, Nov 20, 2004.

  1. mithrandir


    Nov 11, 2004
    I am looking at purchasing an Eden WT-500 Highwayman with a 410 XLT Cab at 4 Ohms. I realize the 4 ohm issue is going to limit me to 250 watts on one channel. I also have a yorkville xc410 at 8 ohms. Can I run the 4 ohm Cab on one Channel and the Yorkville on the second Channel? Will this create a major imbalance in my volume? Does the WT-500 have a 1/4 inch bridged output to run my Yorkville 410 using the full 500 watts if and when I require it? Will the Eden WT-500 operating at 250 Watts have more headroom than a Yorkville BM400 operating at 400 watts. (current Amp) Any input regarding this potential setup will help.
  2. IvanMike

    IvanMike Player Characters fear me... Supporting Member

    Nov 10, 2002
    Middletown CT, USA
    using both cabinets on the 500 in stereo mode should present no problem - i belive there is a balance control
    there is no bridged 1/4" output on the 500, but you can get a cord that has a bannana plug on one end and a 1/4" plug on the other. without knowing the sensitivity of the yorkville cabinet, its hard to say if it would be louder at 400 watts than the eden at 250.