1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Eden WT-600

Discussion in 'Amps and Cabs [BG]' started by salsjag, Dec 24, 2002.

  1. I know this is a stero amp with 300 watts x2. Bridged it gets to 600watts. Here is my question. Can you bridge this amp and hook it up to two 112's which are each 8 ohms. I know when you hook up two 8 ohm cabs the ohms drop to 4 ohms. However, Since the WT-600 says bridged at 600 watts into 8 ohms will this work bridged or do you have to hook them up separately to be 300 watts into 8 ohms on each side?

    Thanks for any input you can give me.
  2. lowfreqman


    Aug 18, 2001
    behind a bass
    You can only bridge into an 8ohm load (one of your 8 ohm cabs). If you want to use both cabs you can either put them both on one side of your stereo amp for 300W of output, or put one on each side at about 150W per side.

Share This Page