/ Register

Effects Processor Config Question

Discussion in 'Effects [BG]' started by markbmbass, Apr 19, 2012.

  1. Apr 19, 2012 #1
    markbmbass

    markbmbass

    Apr 19, 2012
    Hi Guys,

    I'm new, so sorry for asking a question on my first post...

    I have a Markbass Little Tube 800 amp, and a Zoom B3 processor. My question is:

    Should I run the processor directly through the input (front of amp), or run it through the Effects Send/Return (back of amp) when using it? I don't want to damage my amp.

    I have tried both, and just not sure, as I am a dummy when it comes to this sound stuff, still. I have tried running through the effects send/return, but then the EQ on the amp is not available for when I am not using the Zoom.

    Any suggestions?

    Thanks in advance!
     
  2. Apr 19, 2012 #2
    alec

    alec

    Feb 13, 2000
    Perth, Australia
    Your amp can handle both, so you just need to decide which you prefer.
     
  3. Apr 19, 2012 #3
    RickenBoogie

    RickenBoogie

    Jul 22, 2007
    Dallas, TX
    In front is more likely the better option, but try both, see what YOU think.
     
  4. Apr 19, 2012 #4
    CHILDISHGAMBINO

    CHILDISHGAMBINO Inactive

    May 4, 2006
    Courtenay, BC, Canada
  5. Apr 20, 2012 #5
    markbmbass

    markbmbass

    Apr 19, 2012
    Awesome, thanks to all who have replied!