1. Please take 30 seconds to register your free account to post, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Essex Fender neck question.

Discussion in 'Hardware, Setup & Repair [BG]' started by Mazinger, Jun 24, 2004.


  1. Mazinger

    Mazinger Supporting Member

    Nov 9, 2002
    USA
    I have a mitey mite neck that was on an SX bass.
    Anyone know if the holes (on the neck) will line up with a fender body.

    Thanks.
     
  2. In theory, they are the same. In practice, you should check first before making a commitment to anything.
     
  3. What Hambone said! I just went through this when I bought a used neck for my P-clone. If the holes don't line up, it is a very simple chore to plug the old holes with dowels and glue and then redrill correctly positioned holes after the glue dries...total time about a half hour or so.
     
  4. Mazinger

    Mazinger Supporting Member

    Nov 9, 2002
    USA
    Thanks guys.

    My current project is a P-bass. MIM black body with a mighty mite maple/maple neck.