1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

fEarful™ 12/6 & 15/6 enclosure designs - FREE! (Part VI: Electric Boogaloo)

Discussion in 'Amps and Cabs [BG]' started by Barcode, Mar 17, 2010.

Thread Status:
Not open for further replies.
  1. yannn


    Feb 4, 2010
    I'm not sure how I have to wire my cab. I put together a small shematic. Is it right to wire it like this?
    Concerning the maximum power I can drive into this cab:
    The 6ND410 has a maximum power of 240W. I read somewhere that the power distribution at a crossover frequency of 800hz is about 70%woofer/30%mid.
    So in a 15/6 the 3015LF would get 560W if the mid is driven to its limit of 240W, which is too much for the 3015LF. A single 15/6 can take about 650W (450 Woofer/200 Mid), if the power distribution formula above is right.
    So if I add a second 3015LF I can still push the 15/6 with 650W (see my shematic above; I will refer to the circuit of the 15 with the 6 as 15/6 and the single 15 wired in parallel as the second 15). The second 15 would get 650W too, but becasue of the lowpass filter it will only get 450W. So the total amount of power I can push into this cab would be 1300W, which is quite a lot. I am a noob so pls correct me if I'm wrong:D
  2. Thor

    Thor Moderator Staff Member Gold Supporting Member

Thread Status:
Not open for further replies.

Share This Page