Fender Urge I pickup connectors.

Discussion in 'Pickups & Electronics [BG]' started by 59jazz, Aug 5, 2022.


  1. 59jazz

    59jazz Infinite Rider on the Big Dogma Supporting Member

    10969D9B-837A-4033-9AA4-ADACD343934F.jpeg I recently purchased a well used Urge I, and would like to experiment with a pickup swap. The oem pups come with connector and would like to use the same on the other pickups. Any Idea as to what type they are and where they can be purchased from?
    Many thanks!
     
  2. dwizum

    dwizum

    Dec 21, 2018
    59jazz likes this.
  3. 59jazz

    59jazz Infinite Rider on the Big Dogma Supporting Member

    Thanks for the heads up! So many versions of the 70107 connector, and some of the examples pictured in the catalogs, are not the actual part; GAHHH! Lots of research ahead of me, thanks again!
     
    dwizum likes this.
  4. dwizum

    dwizum

    Dec 21, 2018
    yeah that's the catch, these things are highly configurable. It's kind of an odd connector choice for this purpose, versus something like the ubiquitous .1" pitch square pin connectors EMG uses.
     
  5. 59jazz

    59jazz Infinite Rider on the Big Dogma Supporting Member

  6. 59jazz

    59jazz Infinite Rider on the Big Dogma Supporting Member

  7. dwizum

    dwizum

    Dec 21, 2018
    that looks correct! Prewired on a harness is easier if you don't want to screw with crimping the pins.
     
    59jazz likes this.

Share This Page