PayPal: Quick Sale needed Prices Negotiable! Used TC Electronic RH450 Class D Bass Amp head with original Boxes and Manual. Includes Gigbag Includes Footswitch. (which has an LED window displaying the tuner function) ($150.00 add on) Light use excellent condition. Powerful lightweight, loud head with really good tone and flexible EQ. 3 presets (for Tube tone emulation and gain) Each band of the 4 band parametric EQ is adjustable as to what frequency the shelving point is affecting Built in Compression and overdrive Built in tuner. Easy to ready, program and understand Rugged aluminum case. Speakon (green dual use) connectors. Specifications from Manufacturer: Tech Specs Input Section Input connector -1/4" jack Input impedance -1 Mohm / 100 pF Gain range -96 to 32dB Tone control Bass Center Freq: 280Hz (range: 71-1120Hz, Gain: +15/-24dB) Low Mid Center Freq: 400Hz (range: 100-1600Hz, Gain: +15/-24dB) High MidCenter Freq: 800Hz (range: 200-3150Hz, Gain: +15/-24dB) Treble Center Freq: 1600Hz (range: 400-6300Hz, Gain: +12/-24dB) Tube Tone 0 to12, Tube amp Recreation Spectra Comp 3 band Spectral Compression Preset Level -12 dB to 0 gain attenuation User Memories 3 memory locations storing all front panel controls except Mute & Master Level Tuner Tuning range Chromatic, constant on A0 (27.50Hz) to E5 (659.26Hz) Mute Mutes speaker out, Phones out and Balanced out Master Level Headphone Output Studio quality headphone amp Impedance 40 to 600 Ohm Mains supply Universal 100 - 240V 50/60Hz (85w @ 1/8 Power) Speaker out Combined Speakon / 1/4" jack Power module rating 450W (800W inst. Peak @ min. Load) TCE Power rating and Active Power Management Balanced output Transformer Balanced XLR, Pre/Post Pre-amp Max. Output +0dBu Optimal Load Impedance 600 Ohm Preamp out 1/4" Jack, Balanced Output, Max Output Level = +8dBu Power amp in 1/4" Jack, balanced input, impedance = 10 kOhm, Max Input Level = +8dBu Rehearsal input RCA, Left/Right input, fits to iPod ® Digital Recording out Balanced XLR, AES/EBU, (24-bit) Remote connection 5 pin DIN, Cable with shield Dimensions 275 x 290 x 66 mm / 10,8" x 11,4" x 2,6" Weight 4kg / 8.8 pounds Finish Sandblasted die-cast aluminum Bass Amplifier,Bass Head, Amp,Bass $500.00 $400.00 shipped Need to sell these fast and as a pair preferably! for the pair> $500 $450 (250.00 Each) these go for $400.00 each new 30lb 300 watt cabs are switchable between 4 or 8 ohms (dual voice coils) from musician's friend : A strong, portable bass cabinet that will withstand heavy gigging while providing a contemporary and stylish aesthetic to any stage. With Hartke's HyDrive Series 112 300W 1x12" Bass Speaker Cab, you get the best of both worlds: the warm tone of traditional paper cones and the clear, punchy attack of aluminum. HyDrive's patented Hybrid Cone Technology produces a speaker that uses an outside paper cone to push a warm, deep low frequency and an inner aluminum cone that produces mids and highs that cut while still remaining sweet. The result is a revolutionary improvement in bass speaker technology. Hartke brings you the next bass cabinet in the HyDrive series: HyDrive 112. Suitable for any playing style, this unit is a specially tuned, ported bass cabinet whose key components include a single 12-inch, 300-watt HyDrive neodymium hybrid cone driver and a 1-inch titanium high frequency compression driver. Designed to accommodate any bass player, the speaker is engineered as a dual-impedance driver, allowing you to switch between 4 and 8-ohm impedances. The cabinet's handle, and steel grill provide a contemporary and stylish aesthetic to any stage or studio. With these features, HyDrive 112 bridges the gap between small, quiet gigs and big, loud shows. And it only weighs 30 pounds! For you bassists that specialize in entertaining the coffee house, HyDrive 112 (HX112) is your double shot latte. Not only is the HX112 ideal for small, quiet gigs based on its extremely portable, lightweight enclosure, but for the warm, solid bottom end tones that are never too boomy. Despite the hefty power handling that the cabinet possesses, HX112 remains attractive to performers due to the system's multi-level impedance feature. Instead of running your HX112 at maximum heat for the duration of your set in a low-key jazz lounge, you can conserve power by doubling the cabinet's impedance level. Save it for your next show at The Forum. For you bassists who rely on your full stacks to drive your fans wild, HX112 is your double shot of whiskey. The addition of a second HX112 will provide you with your coveted full stack look and will surely provide you enough power to shake every stage on the world tour. Speaking of touring, everything about the HX112 screams roadworthy durability: reserve power, steel grill, and inset side handles. In addition, the HX112 is shaped with the highest quality plywood with extensive bracing and dado joinery, encasing true sonic quality within a rigid, yet lightweight enclosure. Features 1 x 12-inch 300 watt HyDrive neodymium hybrid cone driver 1-inch titanium compression driver Power Handling: 300 watts Ported Cabinet Impedance: Switchable between 4 and 8 ohms Frequency Response: 41 Hz to 17 kHz Sensitivity: 96 dB @ 1 W/1 m Voice Coil: 2.5" Parallel Speakon(R) and 1/4" inputs A 112 Bass cab that goes where full stacks went before.