Nice Allparts bound and blocked neck. I bought this for a project that I didn't get around to finishing. The neck has never been installed. The project bass was going to be Ocean Turquoise Metallic with a matching headstock. The headstock is painted with Reranch OTM nitro but not yet clearcoated. Under the OTM is BIN shellac primer for a sealer coat, so it would be very easy to remove the OTM with lacquer thinner if you wanted a different color. I thought I'd start it here as-is in case it matches someone's dream neck. Here are the specs from the Allparts website: 20 frets (.103" x .045") Maple bass neck with white binding and vintage tinted finish Rosewood fingerboard with white pearloid block inlays 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole diameter 11/16" Truss Rod adjustment at heel Neck thickness .89" at first fret, 1.00" at twelfth fret $225 shipped and PayPal'd in the lower 48.