1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

FS: Digidesign Digi002 Rack Audio Interface

Discussion in 'For Sale: Other Stuff (Not bass related)' started by stu1965, Jan 7, 2012.


  1. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    Missing 4 knobs, but works perfectly. $200 plus shipping (CONUS)

    This Digi002 has been sitting in my rack and has rarely been used (i have a second one that i used more). It still is in like new excellent working condition almost zero scratches. It comes power cable. Everything is ready and you just need a computer to set it up and start your studio recording section. The unit work 100% perfectly, as do all of the features and functions.

    [​IMG]

    Features

    FireWire connectivity (no PCI card required)
    8 touch-sensitive, motorized faders
    8 motion-sensitive rotary encoders used for pan/send/meter/plug-in control
    10 scribble strips for track name, pan, send, fader, plug-in values, and timeline position
    8 analog inputs, 8 analog outputs
    4 mic pres with individual gain and high-pass filter; 48V phantom power enabled on channel pairs
    8 channels of ADAT optical I/O, 2 channels of S/PDIF I/O
    Outputs 1 & 2 mirrored on 1/4" TRS monitor output (with dedicated volume control) and RCA-based -10 dBV fixed output
    MIDI I/O: 1 IN port, 2 OUT ports (16 channels IN/32 channels OUT)
    24-bit/96 kHz A/D and D/A converters
    Stand-alone mode: 8x4x2 digital mixer with EQ, dynamics, effects
    Alternate Source Input for direct monitoring of -10 dBV audio equipment (tape players, CD players, etc.)
    Headphone output with dedicated volume control knob included
    Transport control
    Digi 002 Specifications
    A/D
    Sample rate: 44.1, 48, 88.2, 96 kHz
    Max Input:
    Inputs 1-4 (mic): +3 dBu
    Inputs 1-4 (line): +18 dBu
    Inputs 5-8 (line/+4 mode): +18 dBu
    Gain Range:
    Inputs 1-4: Mic Setting: +18 — +65 dB; Line/DI Setting: +0 — +50 dB
    Inputs 5-8 — fixed +4 dBu or -10 dBV
    Mic E.I.N (unweighted): Inputs 1-4: -127 dBu @ 65 dB gain, 150 ohm source, 20 Hz — 20 kHz
    THD+N @ 40 dB gain (mic input) @ 1 kHz: Inputs 1-4: 0.004% @ 1kHz, -1dBFS after 40 dB gain
    THD+N (line input): see notes 1 and 3
    Inputs 1-4: 0.004% @ -3 dBFS input level (minimum gain)
    Inputs 5-6: 0.002% @ -1 dBFS input level
    Inputs 7-8: 0.003% @ -1 dBFS input level
    Dynamic range: see notes 1 and 2
    Inputs 1-4: 101 dB A-weighted, 98 dB (unweighted)
    Inputs 5-8: 108 dB A-weighted, 105 dB (unweighted) see note 5
    Alt Source Inputs: 99 dB A-weighted, 97 dB (unweighted)
    Frequency Response: see note 3
    +0.15 / -0.5 dB, 20 Hz — 20 kHz
    Input Impedance:
    Inputs 1-4 (XLR): 2 kohm
    Inputs 1-4 (1/4"): 10 Mohm
    D/A
    Sample Rate: 44.1, 48, 88.2, 96 kHz
    Max Output:
    Main, Monitor, and Outputs 3-8: +18 dBu
    Alt. -10 dBV Outputs: +4 dBV
    Headphone Outputs: +15 dBu, 150 ohm load
    Dynamic range: see notes 1, 3, and 4
    Main Outputs: 114 dB A-weighted, 112 dB (unweighted)
    Monitor Outputs: 112 dB A-weighted, 110 dB (unweighted)
    Outputs 3-8: 114 dB A-weighted, 112 dB (unweighted)
    Alt. -10 dBV Outputs: 98 dB A-weighted, 95 dB (unweighted)
    THD+N: see notes 1, 3, and 4
    Main Outputs: <0.0016% (-95 dB)
    Monitor Outputs: <0.0016% (-95 dB)
    Outputs 3-8: <0.0023% (-93 dB)
    Alt. -10 dBV Outputs: <0.0023% (-93 dB)
    Frequency Response: see note 3
    +0.15 / -0.5 dB, 20 Hz &#8212; 20 kHz
    Output Impedance: 50 ohms
    Note 1: Measurement made using balanced connectors
    Note 2: ADC measured -60 dBFS method with a gain setting such that +24 dBu = 0 dBFS at S/PDIF output
    Note 3: Measured relative to level at 1 kHz
    Note 4: Measured with digital input at -60 dBFS @ 1 kHz
    Note 5: Measured using "+4" setting

    Dimensions:
    Width = 18.9 in /48.3 cm
    Diameter = 17.1 in /43.5 cm
    Height = 6.1 in /15.6 cm
    Weight = 15 lbs 3.2 oz /6.9 kg
    FireWire cable = 6-pin to 6-pin, 12 ft / 3.7 m
     
  2. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    bump
     
  3. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    bump
     
  4. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    bump
     
  5. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    bump
     
  6. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    bump
     
  7. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    still for sale !
     
  8. stu1965

    stu1965

    Aug 9, 2010
    Tampa, Fl
    SOLD
     

Share This Page