1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

SOLD FS: EBMM SR5HH nat/maple

Discussion in 'For Sale: Bass Guitars' started by Snarf, Feb 16, 2013.


Thread Status:
Not open for further replies.
  1. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    $[DEL]1250[/DEL] 1200 shipped CONUS.

    Nice instrument, but the SR sound isn't for me. I thought it might be, but nope. Back to passive instruments for me! Only real sign of wear is top of the headstock, and the fingerboard is slightly darkened from play. Serial number: E17870

    [DEL]Here's a caveat with this bass: I was in the middle of putting straplocks on, and got the bottom one on successfully. The upper horn lock has about a centimeter gap between the bottom of the lock and the horn due to me pretty much completely stripping the screw head. So please be aware, you will need to get this screw out somehow, probably with pliers. I'm not very handy and don't have any tools, otherwise I'd give a go at it. Consolation: free strap locks and original pins included as well.[/DEL]

    This bass is now strap pin issue free! Comes with original pins.

    HPIM0010.

    HPIM0011.

    HPIM0013.

    IMAG0018.

    IMAG0016.

    IMAG0012.

    IMAG0009.

    IMAG0008.
     
  2. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  3. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  4. Tunaman

    Tunaman

    Dec 26, 2004
    Boston
    Hey Snarf... if you get it out... all you have to do is throw a few toothpicks in & screw it back up... maybe a touch of glue too... you're good.
     
  5. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    Oh, it's not the screw shaft that's messed up, it's just the head. Edited op to reflect that.
     
  6. 5StringThunder

    5StringThunder

    Dec 28, 2012
    Take a dremel and cut the screw shaft so that the head comes off and exposes a relatively flat top on the screw. Then take the same dremel and cut a line through the diameter of the shaft, use a flat head screw driver to unscrew it and get it out.
     
  7. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    Would have to cut through the strap lock to get to the head. :crying:

    Also, I don't have any tools.
     
  8. Arch58

    Arch58 Supporting Member

    Dec 18, 2009
    Hudson Valley, NY
    PM sent
     
  9. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  10. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump, make me an offer.
     
  11. Arch58

    Arch58 Supporting Member

    Dec 18, 2009
    Hudson Valley, NY
    Another PM sent
     
  12. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump, PMs replied.
     
  13. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  14. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  15. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    herp derp
     
  16. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump, open to cash offers, no trades. Unless you have a small 110 or 112 combo (under 30 lbs) to chip in with.
     
  17. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    Bump, original issues FIXED.
     
  18. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  19. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     
  20. Snarf

    Snarf

    Jan 23, 2005
    Glen Cove, NY
    bump
     

Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.