FS/FT: 93' Ken Smith Burner 6 Swamp Ash Body/ John East U-retro Preamp

1993 Ken Smith Burner 6 Swamp Ash Body
(if you saw this add earlier, Im no longer selling the bass with John East electronics)

Hey guys here's a good one. This series of burner basses were made in Japan and "finishing work" was done at Ken's shop in PA...Great tone, craftsmanship, and in excellent condition. 16.5mm string spacing at bridge, I have no idea what the spacing is at the nut, but the spacing along the fingerboard is wider than what you would expect from a (16.5mm @bridge bass, if that makes sense The weight is 10.3 lbs ( I'll know exactly a little later today and will edit if needed. 34" scale with a super tight low B...I actually tune down to A and its thunderous with tremendous clarity. All the frets are in excellent condition and no dead spots on the neck. The only negative comment about this bass is that previous owner made a second hole for the strap near the base of the body(pictured). The only trades I'm interested in are as follows: 5 string Jazz basses with maple fingerboards, 5 string PJs


$750 shipped with OHSC

Pm or text if interested
618 980 3904 Jordan


http://www.flickr.com/photos/[email protected]/

 

hey doug, thanks for the inquiry

the string spacing at the bridge is 16.5mm and the weight of the bass is 10.3lbs

 

Pm's replied, the bass comes with the original tear drop hardshell case.

 

Tuesday bump!

 

$750 shipped with OHSC!!!