1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

FS Markbass F1 Bass Head Amp 500W

Discussion in 'For Sale: Amps, Preamps, and Cabinets' started by thumbfinger5, Apr 21, 2009.


  1. **PRICE DROP** Need to move $600 SHIPPED!!


    Need to get rid of some stuff, saving up for a new bass. Up for sale Markbass F1 bass head. Powerful little sucker!! Very lightweight and very convenient to carry. Can fit in a backpack with no problem, weighs only 5 lbs. but can blow you away when hooked up to the right rig. I hooked it up to Goliath 111 and it sounded awesome. No scratches or dents. Works perfect. *Mint*
    asking price $ 650 shipped Retails for $800. Paypal and money order only please. Will ship only in continental US. Thanks.


    The F1 is Markbass' lightest and smallest bass amp head to date. At 500W the F1 bass amp boasts an unbelievable power-to-weight ratio of more than 100W per pound. Its digital power amp gives the Markbass F1 bass amp head super-fast response and a crisp, clear, full sound that will convey every detail of your playing, instantly.

    The F1 amp head's 1/4" input jack works with both active and passive basses and allows you to EQ your sound with Low, Mid Low, High Low, and High control knobs, as well as Markbass' exclusive VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters, with separate Gain and Master volume controls.

    The rear panel has a balanced XLR out, Neutrik Speakon Combo jacks which work with either Speakon or 1/4" speaker cables, a tuner out, as well as Effect Send and Return 1/4" jacks to ensure you don't lose your main signal if a piece of your effects chain dies. There is also a ground lift switch to help eliminate hum. Despite being lightweight, the Markbass F1 bass amp head is made with a rigid 2mm thick aluminum chassis to ensure your investment can handle the rigors of the road.
    Markbass F1 500W Bass Amp Head Features:

    * Digital amp bass head
    * Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
    * 1/4" input jack works with active or passive basses
    * Gain and Master volume controls
    * Clip warning light
    * EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
    * VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
    * Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
    * Balanced XLR out
    * Ground lift switch to eliminate hum
    * Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
    * Send and Return Effect ensures main signal continues even if something dies in your effects chain
    * Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
    * Surface-mount components are silicon-sealed to isolate vibrations
    * Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
    * Integrated threaded posts for easy assembly/disassembly and added durability
    * Rigid 2mm thick aluminium chassis for a durability on the road

    Markbass F1 500W Bass Amp Head Specifications:

    * Power
    * Input impedance: 500Kohm, max. voltage: 15 Vpp
    * Effect Return impedance: 33Kohm, max. voltage: 25 Vpp
    * Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
    * Power Requirement: 100V; 120V; 230V; 240V; 50/60Hz

    Controls
    * GAIN: 80dB to +25dB range
    * GROUND LIFT: Switch on rear panel
    * MASTER VOLUME

    Equalization
    * LOW
    * Center frequency: 40Hz; level ±16dB
    * LOW MID
    * Center frequency 360Hz, level ±16dB
    * HIGH MID
    * Center frequency 800Hz, level ±16dB
    * HIGH
    * 10kHz shelf; level ±16dB
    * VPF (Variable Pre-shape Filter)
    * center frequency 380Hz (cut)
    * VLE (Vintage Loudspeaker Emulator)
    * frequency range 250Hz 20 kHz (cut)

    Outputs
    * EFFECT SEND
    * Unbalanced, max. voltage 20 Vpp (pre-EQ)
    * TUNER OUT
    * Unbalanced, max. voltage 25 Vpp
    * LINE OUT
    * Balanced XLR, max. voltage 10 Vpp
    * SPEAKER OUT
    * Speakon, 1/4" x 2

    Other
    * Dimensions: 10.87"(W) x 1.73"(H) or (1U) x 10.04"(D)
    * Weight: 4.63 lbs.
     

    Attached Files:

  2. Bump!
     
  3. Bump price drop
     
  4. last chance this baby is off to ebay.
     

Share This Page