1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

FS: New maple/maple necks for your project

Discussion in 'For Sale: Parts, Strings, and Accessories' started by Syco_bass, Jun 12, 2012.


Thread Status:
Not open for further replies.
  1. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    I have two of the same necks. These are brand new, never used, Maple/Maple necks. They will fit Fender and Squier neck pockets and have tilt back headstock design. They have 20 frets with squared off overhang. Fretboards have been sealed and back of neck has been oiled. These are rough necks and will need finish sanding and finish.

    Specs are;
    1.5" at the nut
    2.5" at the heal
    .86" thick at the first fret.
    tuning peg holes are standard 11/16" (fit standard Fender P or J bass tuners)
    Fret board radius is 12"
    Nut and truss rod cover included with necks. (not installed)

    If you would like, I can do the sanding and finishing for you. -Not included in price, but PM me for a price quote.

    I'm only asking $90 each for these as is. $160 shipped if you buy both.

    Thanks for looking.

    GEDC0246.gif

    GEDC0247.gif
     
  2. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    Lower price bump.

    These are good necks, I just don't want to spend the time sanding them. I have too many projects on the board right now so these have to go.

    My loss is your gain.

    Cheers.
     
  3. MasterBass!

    MasterBass! Reaching new Highs in Lows!! In Memoriam

    Nice necks, brother Rob!
     
  4. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    Yeah good value for the money. Good fret board and fret work, just needs finish sanding and finish of your choice. Which I can do, if anyone is interested.
     
  5. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    ttt
     
  6. Joe Milstein

    Joe Milstein Inactive Commercial User

    Dec 7, 2007
    Central New Jersey
    Gamma Bass Guitars
    These are amazing necks! I have used them on a few projects and they work amazingly well! Worth double. Free bump for great necks and a super TBer with mad skills.
     
  7. 9mmMike

    9mmMike Would you happen to have a cookie for me? Supporting Member

    I am not actually shopping for these but you may wish to list the fingerboard radius and tuning hole diameters. I know that this is info that is handy for some.
     
  8. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    O.P. updated to reflect. Thanks.
     
  9. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    ttt
     
  10. Payment sent!
     
  11. Syco_bass

    Syco_bass Supporting Member

    Aug 13, 2008
    Tucson, Arizona
    Sold.
     

Thread Status:
Not open for further replies.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.