SOLD FS: QSC PLX2402 w/bridge cable

Hey Y'all,

I'm raising funds to order a new US G&L so a couple of things I had hoped to hold on to are going to be "set free" (well, not for free but you get the idea).

QSC PLX2402 I picked up used in excellent condition. I'll include a bridged cable I made for it when I was driving a pair of 8 Ohm Schroeders (no those are long gone) with another 2402.

stereo output:
425W @ 8 Ohms
700W @ 4 Ohms
1200W @ 2 Ohms

bridged mono output:
1500W @ 8 Ohms
2400W @ 4 Ohms

Wanna move some air? This puppy will move some air. The reason I'm selling it is to fund a new bass and I have other power amps (Carvin DCM1000, QSC PLX1804) that fit my current set of cabinets better.

The only trade I'd consider is a US G&L JB-2 with a #6 neck (not the standard #8 which makes it unlikely I'll find one, hence I'm looking to order one)

If you must have pics (it looks like a 2402 in excellent condition) let me know and I'll pull it out of the rack and take some.

I made the bridged cable myself with decent wire (13 ga) and Neutrik speakon connectors. If you don't want/need it let me know and I'll keep it and convert it back to a regular cable as a backup.

$450 plus ship/USPS MO/contiguous 48

 

It's the previous generation. I think the new equivalent is the 2502. QSC info on this series is at http://www.qscaudio.com/products/amps/plx/plx.htm

This amp is 21lbs and 13" deep - fits in many shallow racks (I use Gator shallow racks) and is nice and light for the output.

 

Possible trades:

skinny necked G&L (1.5" nut width)
- JB-2, SB-2, L2K, ASAT SH all good, no non-semihollow ASATs, check on others
- must have a satin neck (no gloss or GOT)
- under 10 lbs
- if ASAT semihollow must be 3-bolt

 

*** SOLD ***