SOLD FS: Squier Loaded RW/Maple Neck

Selling a Squier 4-string bass neck. This is a C-shaped neck, with 20 medium jumbo frets,
a rosewood fingerboard, 9.5" radius, and a 34" scale.

The width at nut is right at 1.5 inches; width at the heel is 2.5 inches.

It has a "Crafted in Indonesia" decal on the back of the headstock. The truss rod adjustment is a little snug.

Includes 4 Squier standard tuners and the factory-installed nut.

Asking $60 shipped CONUS.

 

The neck has some relief (back-bow?) from the 2nd to the 12th fret. I tried to take a picture to show it, but it appears to be about 3mm between the top of the fret and the straight-edge at the 7th fret, which seems to be the largest offset.

I played with the truss rod some in the past, but I am always reluctant to over-torque it in fear of doing permanent damage.

I did back off the torque since taking the neck off the body, so the 3mm shown in the images may be more than when I was playing it.

Hope this helps.

 

The frets are pretty nice; the fret-wire is cut to the proper length, so there's none of that tearing up hands when moving up and down the neck. The neck is more of a Jazz profile than a P-bass profile, so it's a pretty fast neck.

I am not replacing the neck; I'm actually selling the bass as parts so I can buy parts for my main and only bass (5 string fretless).

 

More pix of the neck

 

Why, yes it is! From a Precision (PJ) Special, crafted in Indonesia.

 

Price drop to $70.

 

Price drop to $65. Need to move the neck (to turn the head).

 

I know, right?! Neck includes the tuning machines and nut. That's gotta count for something.

I personally think it's a pretty good deal.

 

Bump

 

Bump

 

Price dropped to $60. Need to move this in order to make way for a 5-string fretted on my GAS list.

 

Bump. Priced to sell.

 

Sold!