Genz Benz shuttle 9.0 ohm question.

Discussion in 'Amps and Cabs [BG]' started by gbass1, Apr 29, 2012.

  1. gbass1


    Sep 3, 2009
    las vegas
    I have a gb shuttle 9.0. I have 2 8ohm cabs. There are 2 speakon connections on back of amp. In order to achieve a 4 ohm load from the amp do I connect each cab from the 2 speakon connections or come out of 1 of the connections and link the cabs?

  2. agedhorse

    agedhorse Supporting Member Commercial User

    Feb 12, 2006
    Davis, CA (USA)
    Development Engineer-Mesa Boogie, Development Engineer-Genzler (pedals), Product Support-Genz Benz
    Either way presents an identical connection to the amp. The amp's connectors are paralleled internally so it doesn't matter if you use a cable from each speakon output to each cabinet or a speakon cable from the amp to 1 cabinet and then to the other.
  3. gbass1


    Sep 3, 2009
    las vegas
    Thank you!!

Share This Page