1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Gibson EB-O pup recommendations

Discussion in 'Pickups & Electronics [BG]' started by MJB, Sep 9, 2001.

  1. MJB


    Mar 17, 2000
    I'm looking to clear the mud from my 65 EB-O, any pup ideas? I don't want to butcher the bass so it would have to drop right in.

  2. DiMarzio used to make a "Sub Woofer" or "Super Woofer" pick up it comes standard in Billy Shennans (Mis-spelled)Yamaha. His original bass was a P bass with an EB-0 right against the neck. I would look at that one first. I don't know if its a drop in fit but its in the right place at least
  3. notduane


    Nov 24, 2000
    D/M's got the Model One (DP120) and Will Power Neck Model (DP145).
    Same size, they both have 4-conductor wiring (series parallel coil
    switching), and ~200mV output. The DP120 has more bass (left graph)...

    t-4298223. t-4298227.

    ( treble - middle - bass )

  4. MJB


    Mar 17, 2000
    Thanks notduane, what I don't need is "more bass".

  5. Monkey


    Mar 8, 2000
    Ohio, USA
    I have a DiMarzio Model One in a Carvin fretless. Serious bottom end. I bet it would sound good compared to the stock pickup. I found it to be very powerful; in fact, I had to have a resister installed to bring down the output, because it completely buried the Carvin stacked-J in the bridge position.

Share This Page