1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

GK MB Owners - Speakon Question

Discussion in 'Amps and Cabs [BG]' started by TNCreature, Mar 30, 2013.


  1. TNCreature

    TNCreature Jinkies!

    Jan 25, 2010
    Philadelphia Burbs
    I know this is a dunce question, so be kind.

    Please tell me which speakon speaker cable to purchase to connect my MB200 to my GK 212.
    I have a sepakon to 1/4" which is not working at all,

    So please, brand name, speakon to speakon? Speakon to 1/4"?
    2 pin 4 pin? gauge? male or female! arg! I am easily confused, so just tel me what to get.

    The GK manual refers to a GK cable that doesn't seem to exist.

    I appreciate the help!

    Mark
     
  2. Slowgypsy

    Slowgypsy 4 Fretless Strings

    Dec 12, 2006
    NY & MA
    I've got an older GK MB200 which can use either a 1/4" or Speakon connection. You mentioned this is going into a GK 212 cab, but you didn't say which specific model. Does the cab require a Speakon or 1/4" input? There's no biamping with the MB200, so you don't need a "special" Speakon cable like you do with the RB series amps that have biamp ability. Also, if the cab is, say, a NEO 212... there will be a switch to put the cab into either biamp or full range mode... with the MB200, put the switch into full range.
     
  3. TNCreature

    TNCreature Jinkies!

    Jan 25, 2010
    Philadelphia Burbs
    I have the 212mbe cabinet which has both a speakon and 1/4" jack.
    Thanks for the help!

    I really should learn to make cables.
     
  4. TNCreature

    TNCreature Jinkies!

    Jan 25, 2010
    Philadelphia Burbs
    Thanks B-String. Perfect!
     
  5. Just a side note- the newer mb200's don't have the same dual jack. They only work via speakon. It was a bit disappointing to find out after the manual stated otherwise but qué será.
     
  6. IIRC world certification would no longer allow the dual purpose jack.
     

Share This Page