1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  

Going through ALOT of 9V batteries?

Discussion in 'Line 6' started by EW57, Apr 10, 2010.


  1. EW57

    EW57

    Aug 3, 2006
    Special thanks to Mk357 over at the Line6 message board for the inspiration/guidance!!! Here's what I used:


    (2) Keystone Electronics Battery holder 4 AA Mfr. Part#: 2478 $1.51
    (1) Keystone Electronics 9V battery Strap Mfr. Part#: 84-4 $0.44
    (1) Case Logic Medium Camera / Flash Camcorder Case Mfr. Part#: TBC-303 $9.97
    (1) Dritz ¾” magnetic snap $4.89

    Case Logic case available at Walmart, Staples, Amazon. etc
    Keystone Electronics components available at Allied Electronics, Mouser, Digikey, etc
    Dritz snap available at Hobby Lobby. craft stores.

    Note: the polarity/wire colors will need to be inverted between the battery strap and the battery holder to supply the XDT4 with the correct polarity.

    Dritz snap available at Hobby Lobby. craft stores.


    Note: the polarity/wire colors will need to be inverted between the battery strap and the battery holder to supply the XDT4 with the correct polarity.


    Pics!

    http://www.flickr.com/photos/werks99/sets/72157623825057210/
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.