1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)
  2. Because Photobucket has chosen to in effect "take down" everyone's photos (unless you pay them), we have extended post edit time in the Luthier's Corner to UNLIMITED.  If you used photobucket and happen to still have your images of builds, you can go back and fix as many of your posts as far back as you wish.

    Note that TalkBass will host unlimited attachments for you, all the time, for free ;)  Just hit that "Upload a File" button.  You are also free to use our Media Gallery if you want a place to create albums, organize photos, etc :)

Graphite neck help, fingerboard separation

Discussion in 'Luthier's Corner' started by Tim Cole, Jan 8, 2004.


  1. Tim Cole

    Tim Cole

    Jun 12, 2002
    Findlay, Ohio
    I have a modulus neck, and due to past owners abuse, the FB has separated from the neck. It is a clean separation, and should go back together smoothly. Is there a certain type of adhesive I should use? How do I get the glue into the hard to reach space?

    Thanks in advance.
     
  2. Tim Cole

    Tim Cole

    Jun 12, 2002
    Findlay, Ohio
    pic

    [​IMG]
     
  3. Bass Kahuna

    Bass Kahuna

    Dec 3, 2002
    West Lafayette, Indiana
    Luthier, Custom Builder
    Hi Tim,

    I would suspect that a standard two part clear epoxy would work fine.

    Have you tried contacting Modulus to see what they recommend?

    :^)~
     
  4. Tim Cole

    Tim Cole

    Jun 12, 2002
    Findlay, Ohio
    Modulus is of no help for anything in my experience. The neck is already on it's way to micheal dolan for repair.

    Tim