1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)
  2. Because Photobucket has chosen to in effect "take down" everyone's photos (unless you pay them), we have extended post edit time in the Luthier's Corner to UNLIMITED.  If you used photobucket and happen to still have your images of builds, you can go back and fix as many of your posts as far back as you wish.

    Note that TalkBass will host unlimited attachments for you, all the time, for free ;)  Just hit that "Upload a File" button.  You are also free to use our Media Gallery if you want a place to create albums, organize photos, etc :)

Hamer Cruise neck radius?

Discussion in 'Luthier's Corner' started by FritzM, May 11, 2004.


  1. FritzM

    FritzM Supporting Member

    Jun 21, 2001
    Madison, MS
    Anybody know the neck radius on a USA Hamer Criuse (2-tek)fretless? I need to order a radius sanding block, It seems really flat.

    Thanks___Fritz
     
  2. DW

    DW

    Jun 22, 2000
    All US Hamers use a 14.5" radius, I don't think there's a pre-made block on the market that will fit that exactly.
     
  3. FritzM

    FritzM Supporting Member

    Jun 21, 2001
    Madison, MS
    Stew Mac makes a 14 and a 16. I just need to do a little spot leveling in the 15 to 22nd fret area, the rest is fine. What would you suggest?

    Thanks___Fritz