1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Hartke Help!!!

Discussion in 'Amps and Cabs [BG]' started by Garfunkle, Apr 7, 2002.

  1. Garfunkle


    Apr 7, 2002
    I recently bought a Hartke B-90 and it doesnt pick up in the Input. It only picks up in the Effects Loop. Can someone please help me here!!! I need to know whats going on. Its driving me nuts. :eek: :eek: :eek: :eek:
  2. Kurt M.

    Kurt M.

    Dec 11, 2001
    Reading, PA

    You plug in but you hear no sound unless you plug into the effects loop? First off are you sure you have a good cord for your bass? Wiggle it around a bit and see if you get any sound. The amp could have a loose or improperly soldered input jack.

    If you can't get it to make any noise take it back. If it's used on the net or something take it to your favorite amp fixer upper.

    Good luck.

Share This Page