1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

help with inputs on my 4x10s

Discussion in 'Amps and Cabs [BG]' started by basspunk2005, Jun 27, 2005.

  1. basspunk2005

    basspunk2005 Guest

    Jan 31, 2005
    right, i have two trace elliot 4x10s, on the back there are two jack inputs, one labbeld input and the other link. From the amp head do I plug one cab into input and the other into link or do i plug both into input?please help cheers
  2. basspunk2005

    basspunk2005 Guest

    Jan 31, 2005
    just tried running my cabs with both plugged into input and the overal volume seems a lot louder so i assume this is the way to plug it in?i wont be damaging anything by doing this will i?
  3. BurningSkies

    BurningSkies CRAZY BALDHEAD Supporting Member

    Feb 20, 2005
    Seweracuse, NY
    You can do two things...

    1. Run each cab off of an individual speaker out on your amp

    2. Daisy-chain the speakers, running the 'link' to a second cab.

    Theoretically, you have the same 'load' when you do either. I prefer to use the first method as there's less 'hardware' between the amp and the second cab.
  4. basspunk2005

    basspunk2005 Guest

    Jan 31, 2005
    yea i am using option one, thanks

    HALLO :bag:

Share This Page