1. Please take 30 seconds to register your free account to post, make friends, earn reward points at our store, remove most ads and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Help with Sansamp RBI

Discussion in 'Amps and Cabs [BG]' started by brohar, Jul 9, 2005.


  1. brohar

    brohar

    Dec 29, 2004
    Cincinnati
    There is two 1/4" outputs on the back one Sansamp the other Unaffected. Isnt the output for the Sansamp supposed to be post pre? I ran this into my old crate and the sansamp eq and drive are not doing anything seems like it is totally bypassing the pre amp. I would expect this from the Unaffected output but not the other. I have a power amp on the way and will be using the XLR out for that but still concerned.
     
  2. DaveMcLain

    DaveMcLain

    Jun 19, 2005
    Cuba MO
    The Blend control on the front of the SansAmp controls the amount of SansAmp effect to direct bass signal for max SansAmp it should be turned all the way up. The active control switch on the front should be pushed in to activate the SansAmp, this will also light the LED on the front pannel. Check those things..