/ Register

How put the 25k active tone pot emg in the BQS system?

Discussion in 'Pickups & Electronics [BG]' started by luciano, Jun 20, 2020.

  1. Jun 20, 2020 #1
    luciano

    luciano

    Jul 27, 2015
    DEar,
    Please, how I can plug together the 25k active emg (pictured attached) pot in the BQS system (pictured attached)?
    Best!
     

    Attached Files:

  2. Jun 20, 2020 #2
    testing1two

    testing1two

    Feb 25, 2009
    Southern California
    In theory it's as easy as:
    1. unplug the output cable from the volume pot (the one that goes to the jack) and plug it into the output of the tone pot.
    2. run a 2-wire connector cable from the volume pot output to the tone pot input.
    3. run a red power cable from the "volt" terminal of the tone pot to the 9V power bus
     
  3. Jun 21, 2020 #3
    luciano

    luciano

    Jul 27, 2015
    Hi Testing1two,
    I discovered we need to reverse one of the two ends of the cable from volume to tone (picture attached).
    Thank you!
    Best!
     

    Attached Files: