1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

How to connect my pedals to the SVP-BSP?

Discussion in 'Amps and Cabs [BG]' started by [SD], May 10, 2004.

  1. [SD]


    Feb 24, 2004
    ok, here is my problem i've got a BPS200 from DIGITECH and i'm buying a SVP-BSP from AMPEG which has separate effect loops for each channel, then how to connect my BPS200 to my preamp? Would a Y jack cable be enough to connect it to both effects loops? or would it be more useful to get one of those loooper.com pedals? is there any other brand that make pedals like the ones at looopers.com?

    thanks :D
  2. Jerrold Tiers

    Jerrold Tiers

    Nov 14, 2003
    St Louis
    The preamp output from the "clean/mix" jack will have whichever channel is selected on it. So that would be the best place to connect a single effect.

    In that connection, the preamp master volume will be before the "send" point, which could be a disadvantage or an advantage, depending.

    The two loops are really for having different effects on the two channels.