How to wire a bass for 2 parallel/series switches and a volume

Discussion in 'Pickups & Electronics [BG]' started by GoatScreaming, Sep 20, 2021.


  1. GoatScreaming

    GoatScreaming

    Sep 20, 2021
    Hi,

    I have a 2009 Warwick Corvette $$ Rockbass that I would like to require for 2 parallel/series switches and a volume. I have no idea how to do this. The pickups
    are 2 passive MEC music man style humbuckers that are passive.

    Thank you in advance!
     
  2. dwizum

    dwizum

    Dec 21, 2018
    Series/parallel on a humbucker with 4 conductor wiring is easy:

    Humbucker_Series_Parallel__12314.1471918417.jpg

    Wire a switch on each pickup using that diagram, and the "hot output to controls" from each switch goes to your volume pot as usual. you could use this diagram as an example - the black "hot output to controls" wire from each switch goes to the left lug of the volume pot where the single black wire is shown here:

    WD1H10_00_WB__06776.1489356357.jpg
     
  3. Primary

    Primary TB Assistant

    Here are some related products that TB members are talking about. Clicking on a product will take you to TB’s partner, Primary, where you can find links to TB discussions about these products.

     
    May 19, 2022

Share This Page