How to wire an on/on/on switch

So I got this switch to select
either the p or j or both pickups, but of course have no idea how to wire it.
Not sure what the colors in the pic are telling me to do. And the voices in my head aren't helping either,

Any tips would be appreciated. (With the wiring, not the voices)

I'm planning on one volume, one tone, and the switch



https://www.guitarelectronics.com/c...N-Mini-Toggle-Switch-w-Bat-Handle-Chrome.html

 

So connect A0 and B0 together. Not sure what the output is( would that be the place on the volume pot where you would normally put the hot wire from the pup?). So a2 and b1 get the hot leads from the pickups? And connect the volume pot to the tone pot as normal, and tone pot to jack as normal?

 

ok, so I finally got around to doing this. I'm getting connection when the switch is at either side, but. no nothing in the middle position, so I'm assuming the connection between a0 and b0 needs to be re soldered. any feedback would be appreciated

 

thanks I'll give I a shot