Psst... Ready to join TalkBass and start posting, make new friends, sell your gear, and more?  Register your free account in 30 seconds.

Hyper(sorta ) ;)

Discussion in 'Pickups & Electronics [BG]' started by dougray, Feb 8, 2004.


  1. dougray

    dougray Supporting Member

    Apr 16, 2002
    western maryland
    ok, i have a lakland 55-02 bass with bartolini MM pickup with bart. jazz. i am trying to wire a Aguilar obp3 pre-amp, and man i am havinig probs with the Blend control... what i mean is all the way to left i have neck pickup all the way right i have bridge BUT inbetween i have nothing? man,i have double/triple checked the wiring dia. and my connections.. but still same prob.i am pulling my hair out,lol. i am using 500K volume with 500K blend controls,any suggestions will be greatly appreciated!,thanx. :help:
     
  2. Is it just at central detent you have no signal, or every position between the ends of the pot's sweep?
     
  3. dougray

    dougray Supporting Member

    Apr 16, 2002
    western maryland
    yes,when the "blend" control is at center detent i have nothing,its a 500K audio blend control,i am going to fiddle with it today, see what i come up with :bassist: ,thanx for reply.
     
  4. dougray

    dougray Supporting Member

    Apr 16, 2002
    western maryland
    hello, used a 25K "blend" control solved all the problems.. :hyper:
    thanx for replies. :D