1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

I really need some help.

Discussion in 'Pickups & Electronics [BG]' started by JustOpenYourMind, May 21, 2003.

  1. Yersteday I plugged My p-bass as usual and I was shoked, nothing no signal from the bass no sound from the amp.

    first I checked my amp and cord with another bass, everything was fine.

    Then i removed the pickguard and checked everything, I have readings with the ohm meter on each pots(they work)and on the pick-up too.

    Please help me :bawl:

    N.b. You can go technical because I study electronics.
  2. I forgot to say that I checked all the wires and they are like the wiring diagaram.

    I just noticed something, there is continuity between the two wires soldered at each side of the input jack, should it be possible that the jack is scrap.

    thanks for your REPLIES:rolleyes:

Share This Page