1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

Installing J bass pu's to MM body

Discussion in 'Pickups & Electronics [BG]' started by zfunkman, Mar 13, 2013.


  1. zfunkman

    zfunkman

    Dec 18, 2012
    Got some Lindy Fralins and MM J bass body. What are the little rubber things that go under J bass pickups? and where do I get them? Help in this would be great.
     
  2. Splods

    Splods

    Oct 7, 2012
    Adelaide, SA
  3. CSEbass

    CSEbass

    Feb 11, 2013
    Tampa
    You can get the screw tubing from online retailers like Bestbassgear
    http://www.bestbassgear.com/pickup-screws.htm
    Some manufacturers include it with the pickups like Delano for instance.
    The foam can actually be used with the packing foam that is supplied with the pickups like some EMG's, Dimarzio, and Delano's. Or you can go to homedepot and purchase the adhesive backed weather stripping.

    Personally I use a dab of hot glue or double side tape to mount the foam to the back of the pickup and use approximately a 1/4 - 1/2" to allow for versatile height adjustment.
     

Share This Page