Jambi - Tool

err, um, does it have a delay? That would be best for emulating the crazy delay part...

 

Delay and Flange for that part. put your flange with the rate about 40% and depth about 50%. I dont have my pedal board here so your own your own for the settings, I think they might be in Brads Tab though If I remeber correctly. Lemme check.....
yup there in there

http://tooltabs.net/tabs/tool/bass/10,000 Days/Jambibass.htm

 

just mess with it and hear what works. You know the effects, surely you can do a little bit of messing around yourself as to settings...

 

He says that cause he's a perfectionist. you'll be able to get everything you need for that song out of that pedal.

 

Ya thats the Colorsound Tonebender about half of Talkbass swear by that pedal(the other half swearing by the Big MUff Pi) I'm sure if you get the right setting with a little bit of High end and low mid boost you should be able to come up with something pretty close, I know I do with my Boss GT-6B, which is a similar pedal.

 

Yes.

 

Justin keeps his delay set at about 300 ms for pretty much every song that uses it on. Flange is as stated above, don't use a very deep setting. During the intro and under the solo, he uses a colorsound tone bender, which is a very bass-heavy fuzz. Try to use some sort of fuzz patch, and boost the hell out of the bass for that patch. There is also an envelope filter he switches on for a note here and there during the solo. For that, I've always just used a wah pedal (which has an auto-on like the 105q). Not sure if you're gonna be able to do that with the bp200.