1. Please take 30 seconds to register your free account to remove most ads, post topics, make friends, earn reward points at our store, and more!  
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

SOLD JohnK Hudson Broadcast Preamp Distortion Tone Pedal

Discussion in 'For Sale: Effects and Pedals' started by JBoogy, May 28, 2017.

  1. JBoogy


    Aug 25, 2015
    Pensacola, FL

    Awesome clone of the Hudson Broadcast. Sounds amazing, beautiful blue color, small box, 9v internally changed to 24v, small but huge sound and only a handful made. Paypal only, shipping to lower 48 included, JohnK description below.

    Hudson Broadcast clone

    The Hudson Electronics Broadcast (made in the UK) is one of my favorite boost/overdrive pedals. I bought mine a little over a year ago but it appears that they are now very hard to find due to the fact that they use a rare NOS germanium transistor and were made in very limited quantities. I paid $285 + $28 shipping for my original 9 volt version, but they later slightly modified the circuit and added 24 volt version which offers more headroom for a slightly higher price. The funny thing is, I actually prefer the sound of the early 9 volt version running on 18 or 24 volts to their later 24V version so that's the one that I decided to clone. The original came in a larger 1590BB with a sticker for the controls (see pic below), but to save space I went with a polished and etched 1590B with alll top jacks.
    Description from Hudson Electronics: " The Broadcast is a transformer coupled, discrete Class-A germanium pre-amplifier based on the classic broadcast consoles of the 1960s. In the low-gain setting, the Broadcast can cover everything from sparkling clean boost through to transparent overdrive, all with a healthy dose of volume available to push your amp. The Broadcast features a specially selected Triad steel-core transformer and a NOS germanium transistor. Advancing the gain on the Broadcast starts to saturate the transformer and the pedal’s discrete circuitry, giving rise to a gentle and dynamic compression coupled with subtle thickening of the midrange. With the gain switch in the high setting and the trim control wound up, the Broadcast starts to deliver heavier distorted sounds with a warm and fuzzy edge to them. The Broadcast covers a wide range of driven and distorted tones whilst remaining dynamic, responding well to pick attack and the subtle nuances of every player."
    I also added a relayed true bypass (the stock pedal uses a standard, inexpensive 3PDT stomp switch). I am also using rare and expensive NOS Mullard black glass germanium transistors as well as Neutrik jacks and silver plated teflon coated wire. The original circuits are built on a large veroboard, which explains their larger enclosure. I drew up and etched my own PCB's for the main circuit as well as the internal charge pump converting 9 volts to 25 volts internally so it only requires a standard 9 volt center negative power supply.
    All of my pedals are built, hand polished and etched one at a time 100% by myself in the USA. I will be offering only 5 of them for sale and each one will be numbered and hand-signed by me inside the bottom cover plate. Please allow a one week build time after purchase.

Share This Page