1. Please take 30 seconds to register your free account to post, make friends, earn reward points at our store, and more!  
     
    TalkBass.com has been uniting the low end since 1998.  Join us! :)

just an average pickup mixing question

Discussion in 'Pickups & Electronics [BG]' started by Zanyman42788, Apr 18, 2004.


  1. Zanyman42788

    Zanyman42788 Guest

    Apr 15, 2004
    california
    my bass currently has a p bass pickup. is it possible to add a j bass pickup without buying a p/j set?
     
  2. To be simple...

    Yes
     
  3. luknfur

    luknfur

    Jan 14, 2004
    DIXIE
    Typically manufacturers just take one of their Ps and bridge J pups to make a PJ set. Personally I would try and stick with a J pup that was sold in a PJ set that matches the P you have - but you can definitely stick about any J pup in. The results would just be harder to predict.
     
  4. Moo

    Moo Banned

    Dec 14, 2002
    Oakland, CA
    I would make sure to get a humbucking J for the bridge or any time you add it to the mix there will be hum.

    I'm fond of the SD hot stack but there's about a dozen or more that will work well.